BX-DS-MB
Product family benefits
- Quick and simple snap-in fixing of the mounting profiles, no tools required
- Robust and corrosion-proof polycarbonate brackets
Areas of application
- Signage and illuminated advertising
- Backlighting of double-sided light boxes and pylons
- Permanent outdoor use in enclosed light boxes
Equipment / Accessories
- Suitable for BackLED DS Plus
Technical Data
Dimensions & weight
Product weight
10.60 g
Width
56.0 mm
Height
17.0 mm
Length
39.5 mm
Logistical data
Commodity code
39269097900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
09-08-2022
Primary Article Identifier
4008321872173
Candidate List Substance 1
No declarable substances contained
Declaration No. in SCIP database
No declarable substances contained
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4008321872173 |
FS
| 30 | 187mm x 156mm x 84mm | 103.00g | 2.45dm³ |
4008321872180 |
VS
| 150 | 436mm x 196mm x 170mm | 2289.00g | 14.53dm³ |
Downloads
Information about Family
These robust mounting brackets are for use with the BoxLED Back DS Plus mounting profile and each pack includes equal numbers of left and right brackets, which are made from strong, corrosion-proof polycarbonate. You can quickly and simply snap the mounting profiles into them, without tools, for straightforward mounting of signage, illuminated advertising, double-sided light boxes and pylons. They can also be used outside, within enclosed light boxes.
Product family features
- Mounting brackets for BackLED DS Plus mounting profile
- Shipping unit comprises equal quantity of left and right brackets
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product | Data sheet | ||
---|---|---|---|
BX-DS-MB
|