BA-RGBW-PL G2
- Simple fixing with M3 screws
- Broad color mixing palette (in connection with light management systems)
- Uniform backlighting of large surfaces thanks to extremely wide angle optics
- Simple connection with open cable ends
- Consistent white light (Standard Deviation of Color Matching SDCM: < 5)
- 5 year guarantee
- Special-purpose and decorative lighting applications
- Dynamic color backlighting
- Dynamic mood lighting
- Spas
- Shops
- Restaurants
- Trade fair lighting
- Permanent outdoor use in enclosed light boxes or channel letters
- Several types of OPTOTRONIC 24 V power supplies available
- BoxLED mounting profile BX-MP
References / Links
For more information on the multi-level guarantee and the terms and conditions of the guarantee visit https://www.inventronics-light.com/multilevel-guarantees
Technical Data
Electrical data
Nominal voltage
24.0 V
Nominal wattage per LED module
3.7 W
Accidental reverse input voltage protection up to
24 V
Input voltage range
23.5 24.5 V
Type of current
DC
Nominal wattage per chain
55.20 W
Photometrical data
Light color (designation)
RGBW
Light color LED
RGB, white
Luminous flux per module chain
2310 lm
Luminous efficacy
42 lm/W
Luminous flux per LED module
154 lm
LED module information
Number of LEDs per module
8
Number of LED modules per chain
15
Minimum operable number of LED modules
3
Dimensions & weight
Product weight
900.00 g
Length
129.0 mm
Width
35.0 mm
Height
12.8 mm
Temperatures & operating conditions
Temperature range in operation at Tc point
-25 55 °C
Temperature range at storage
-25 65 °C
Additional product data
Product remark
Modules perfectly matched to OSRAM OPTOTRONIC LED drivers (see relevant table)/For current photometric data and important safety, installation and application information (see www.osram.com/led-systems)./All the technical parameters apply to the entire module. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values
Successor EAN
4062172030168
Capabilities
Dimming range
5 100 %
Certificates & standards
Type of protection
IP66
Standards
CE
Approval marks approval
CE
Logistical data
Commodity code
940540399000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
18-04-2022
Primary Article Identifier
4052899452930
Declaration No. in SCIP database
In work
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4052899452930 |
FS
| 1 | |||
4052899452947 |
VS
| 5 | 473mm x 328mm x 292mm | 7277.00g | 45.30dm³ |
Downloads
Accessories optional
Information about Family
- Connected with flexible cables
- Type of protection (modules): IP66/IP68
- Special robust encapsulation
- CE marked
- Dimmable by pulse width modulation (PWM)
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
- Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|
BA-RGBW-PL G2
|
154 lm | 3.7 W | 42 lm/W |