DALI SWITCH SO
Equipment / Accessories
- Can be used with all DALI control units
- 24 V supply required (e. g. PS 30)
Technical Data
Dimensions & weight
Height
62.0 mm
Product weight
155.00 g
Temperatures & operating conditions
Ambient temperature range
0…+45 °C
Capabilities
Type of installation
DIN rail mounting
Logistical data
Commodity code
85371098990
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
19-05-2023
Primary Article Identifier
4008321533364
Candidate List Substance 1
Lead titanium zirconium oxide
CAS No. of substance 1
12626-81-2
Candidate List Substance 2
Lead
CAS No. of substance 2
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
39deb6b7-0480-43a6-bbff-c8d3352282ce
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4008321533364 |
FS
| 1 | 97mm x 59mm x 69mm | 170.00g | 0.39dm³ |
| 4008321533371 |
VS
| 8 | 250mm x 208mm x 89mm | 1434.00g | 4.63dm³ |
Downloads
Information about Family
The DALI Switch SO is a flexible signal converter for use with your ENCELIUM DALI light management system (LMS). It is not system specific, so you can use it with all DALI control units to provide DALI-controlled switch output for incandescent lamps, via OSRAM QUICKTRONIC, OPTOTRONIC, POWERTRONIC and HALOTRONIC electronic control gears. It has 3 independent, floating, relay contacts and a switching contact ohmic load capacity of 6 A. It uses DIN rail housing and requires a 24 V supply (e.g. PS30).
Product family features
- DALI-controlled switch output for incandescent lamps, QT, OT, PT, HT control gear
- 3 independent relay contacts
- Load capacity of switching contact: 6 A ohmic load
- Supply voltage: 24 V DC
- Floating contacts
Products
| Product |
|
Data sheet | ||
|---|---|---|---|---|
|
|
DALI SWITCH SO
|
DIN rail mounting |