HTM 150/230…240

Product family benefits
  • Very low power loss thanks to high efficacy
  • Strain relief suitable for different cable types (HTM)
  • Suitable for space-critical installation thanks to compact functional design
  • Extremely compact transformer for highly space-critical installation conditions (HTN)
  • Protective operation throughout the entire partial-load range for long lamp life
Areas of application
  • Effect and accent lighting
  • Living rooms
  • Object lighting
  • Conference rooms
  • Restaurants
  • Recessed and surface-mounted furniture luminaires
  • Shop lighting
  • Event rooms

Technical Data

Electrical data

Lamp wattage

50…150 W

Maximum output power

150 W

Line current

0.57 A

Effectively

Nominal voltage

230…240 V

Power factor λ

0.99

Operating frequency

40 kHz

Approximately

Nominal output voltage

11.4 / 11.5 V

150 W / 50 W

Input voltage AC

207…264 V

Mains frequency

50…60 Hz

System wattage

157.00 W

Efficiency in full-load

95 %

Input voltage range

230…240 V

Max. ECG no. on circuit breaker 10 A (B)

16

Max. ECG no. on circuit breaker 16 A (B)

26

Galvanic isolation primary/secondary

4.00 kV

eff

Inrush current

1.1 A

Maximum

Dimensions & weight

Length

153.0 mm

Width

54.0 mm

Mounting hole spacing, length

146.0 mm

Height

36.0 mm

Mounting hole spacing, width

15.0 mm

Cable cross-section, input side

1.5 mm²

Cable cross-section, output side

2.5 mm²

Wire preparation length, input side

12 / 8.0 mm

Cable sheath / Wire

Wire preparation length, output side

12 / 8.0 mm

Cable sheath / Wire

Product weight

185.00 g

Temperatures & operating conditions

Ambient temperature range

0…+45 °C

Maximum temperature at tc test point

80 °C

Additional product data

Design / version

Compact with cable clamp

Capabilities

Dimming method

Trailing- or leading-edge phase control for inductive load dimmers

Overload protection

Automatic reversible

Overheating protection

Automatic reversible

Short-circuit protection

Automatic reversible

Max. cable length to lamp/LED module

2.0 m

Cable/wire types, input side

NYM 3x1.5 / H05VV-F 3x1.0 / H03VV-F 3x1.5 mm²

Cable/wire types, output side

NYM 3x1.5 / H05VV-F 2x0.75 / H05VV-F 2x1.0 / H05VV-F 2x1.5 / H03VV-F 2x0.75 / H03VV-F 2x1.5 mm²

Dimmable

Yes

Dimming range

0…100 %

No-load proof

Yes

Suitable for fixtures with prot. class

II

Intended for no-load operation

No

Certificates & standards

Approval marks – approval

VDE / VDE-EMC / E1 approval / EAC

Standards

Acc. to EN 61347/Acc. to EN 55015/Acc. to EN 61000-3-2/Acc. to EN 61547/Acc. to EN 61047

Type of protection

IP20

Logistical data

Commodity code

850440909000

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4050300581415 UNV

Unpacked

1 153mm x 54mm x 36mm 185.00g 0.30dm³
4050300581422 VS

Shipping box

10 276mm x 98mm x 166mm 2046.50g 4.49dm³

Downloads

Information about Family

If your project involves space-critical installation or different cable types, consider a HALOTRONIC COMPACT transformer. The HTN version is extremely compact and ideal for use where space is tight, while the HTM has strain relief suitable for different cable types. They are dimmable on the leading edge (without HTN) and trailing edge, very energy-efficient and have electrical isolation between the primary and secondary sides. HALOTRONIC COMPACT protects from short-circuit, overtemperature and overload (electronically reversible), and is ideal where you wish to install accent and/or effect lighting, to light objects and for surface-mounted/recessed furniture luminaires. Other applications include living rooms, event and conference rooms, shoplighting and restaurant lighting. High levels of efficacy mean that HALOTRONIC COMPACT loses little power, and its protective operation throughout the partial-load range promotes lamp life.
Product family features
  • Line frequency: 50…60 Hz
  • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022
  • Line harmonics according to EN 61000-3-2
  • Immunity according to EN 61547
  • Safety: to EN 61347
  • Short-circuit protection, overload protection, overtemperature protection: electronically reversible
  • Electrical isolation between the primary side and the secondary side
  • Dimmable on the leading edge (without HTN) and trailing edge
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Dimmable
Nominal voltage
Width
Height
Lamp wattage
Data sheet
HTM 70/230…240
Yes 230…240 V 52.0 mm 33.0 mm 20…70 W
HTM 105/230…240
Yes 230…240 V 52.0 mm 33.0 mm 35…105 W
HTM 150/230…240
Yes 230…240 V 54.0 mm 36.0 mm 50…150 W
HTN 75/230…240 I
Yes 230…240 V 33.0 mm 22.0 mm 20…75 W