HTL 105/230…240

Product family benefits
  • Very low power loss thanks to high efficacy
  • Through-wiring possible on the primary side
  • Large temperature range
  • Protective operation throughout the entire partial-load range for long lamp life
  • High efficiency
Areas of application
  • Effect and accent lighting
  • Living rooms
  • Object lighting
  • Conference rooms
  • Restaurants
  • Recessed and surface-mounted furniture luminaires
  • Shop lighting
  • Event rooms

Technical Data

Electrical data

Lamp wattage

35…105 W

Maximum output power

105 W

Line current

0.44 A

Effectively

Input voltage DC

176…275 V

Nominal voltage

230…240 V

Power factor λ

0.95

Minimum

Operating frequency

40 kHz

Approximately

Nominal output voltage

11.6 / 11.3 V

105 W / 35 W

Input voltage AC

207…264 V

Mains frequency

50…60 Hz

System wattage

108.00 W

Efficiency in full-load

95 %

Input voltage range

230…240 V

Max. ECG no. on circuit breaker 10 A (B)

23

Galvanic isolation primary/secondary

4.00 kV

eff

Max. ECG no. on circuit breaker 16 A (B)

38

Inrush current

0.6 A

Maximum

Dimensions & weight

Length

170.0 mm

Width

44.0 mm

Height

34.0 mm

Cable cross-section, input side

2.5 mm²

Maximum

Cable cross-section, output side

4.0 mm²

Maximum

Wire preparation length, input side

14 / 8.0 mm

Cable sheath / Wire

Wire preparation length, output side

14 / 8.0 mm

Cable sheath / Wire

Mounting hole spacing, length

140.0 mm

Product weight

160.00 g

Temperatures & operating conditions

Ambient temperature range

-20…+50 °C

Maximum temperature at tc test point

80 °C

Additional product data

Design / version

Long with cable clamp

Capabilities

Dimming method

Trailing- or leading-edge phase control for inductive load dimmers

Overload protection

Automatic switch off, reversible

Overheating protection

Automatic switch off, reversible

Short-circuit protection

Automatic switch-off, reversible

Max. cable length to lamp/LED module

2.0 m

Cable/wire types, input side

H03VV-F 2x0.50 / H03VV-F 2x0.75 / H03VVH2-F 2x0.75 / H05VVH2-F 2x0.75 / H05VV-F 2x2.5 / NYM-O 2x1.5 / NYM-J 3x1.5 mm²

Cable/wire types, output side

H03VV-F 2x0.75 / H05VVH2-F 2x0.75 / H05VV-F 2x1.5 / H05VV-F 2x2.5 / NYM-O 2x1.5 / NYM-J 3x1.5 / NYM-J 3x2.5 mm²

Dimmable

Yes

Dimming range

0…100 %

No-load proof

Yes

Suitable for fixtures with prot. class

II

Intended for no-load operation

No

Certificates & standards

Approval marks – approval

ENEC 10 / VDE / VDE-EMC / EAC

Standards

Acc. to EN 61347/Acc. to EN 55015/Acc. to EN 61000-3-2/Acc. to EN 61547/Acc. to EN 61047

Type of protection

IP20

Logistical data

Commodity code

85044095900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

19-05-2023

Primary Article Identifier

4008321927019

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

ebb551fb-ab30-4e82-ae71-c07c948f767d

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4008321927019 UNV

Unpacked

1 178.00g
4008321927033 VS

Shipping box

10 235mm x 183mm x 89mm 1711.00g 3.83dm³

Downloads

Information about Family

HALOTRONIC PROFESSIONAL HTL is an electronic transformer, dimmable on the leading and trailing edge. It protects from short-circuit, overtemperature and overload (electronically reversible) and has electrical isolation between the primary and secondary sides. Switching between the electronic transformer and the lamp is not permitted. With high levels of energy efficiency, this transformer has many applications, but is particularly good for effect and accent lighting, object lighting and furniture luminaires (recessed and surface-mounted). It is also good for living rooms, conference and event rooms, shoplighting and restaurant lighting. High efficacy means that little power is lost, and HALOTRONIC PROFESSIONAL HTL covers a large temperature range. Protective operation throughout the partial-load range prolongs lamp life, and you can through-wire on the primary side.
Product family features
  • Line frequency: 50…60 Hz
  • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022
  • Line harmonics according to EN 61000-3-2
  • Immunity according to EN 61547
  • Safety: to EN 61347
  • Short-circuit protection, overload protection, overtemperature protection: electronically reversible
  • Electrical isolation between the primary side and the secondary side
  • Dimmable on the leading edge and trailing edge
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Dimmable
Nominal voltage
Height
Width
Lamp wattage
Data sheet
HTL 105/230…240
Yes 230…240 V 34.0 mm 44.0 mm 35…105 W
HTL 225/230…240
Yes 230…240 V 34.0 mm 44.0 mm 50…225 W