LINEARlight Colormix Overall Module

Product family features
  • Design-oriented complete module with integrated optics
  • Multichip RGB LEDs (LR28CA, LR18CE)
  • Individual RGB LEDs (LR18CP)
  • Integrated SMD plug connector (male/female) on both sides of the PCB
Product family benefits
  • Very flat construction height: 13 mm
  • Adequate heat removal thanks to aluminum housing
  • Modules can be easily joined together to make seamless strip lighting
  • The modules are compatible with each other
  • Low maintenance costs thanks to a lifetime of up to 50,000 h (L70/B50)
Equipment / Accessories
  • CONNECTsystem LR
  • Mounting brackets LD-MB

Information about Family

Infuse your LED installation with color, using modules from the LINEARlight Colormix Overall Module range. These design-oriented, flat (13 mm high) modules have RGB LEDs and integrated optics and are compatible with each other, so you can select exactly the light required to meet your needs. Choose from multichip RGB LEDs (LR28CA, LR18CE) and/or individual RGB LEDs (LR18CP), use them for restaurants, bar lighting, architainment, effect lighting (LR28CA), background lighting (LR18CE), wall washing and mood lighting (LR18CP); use one product from the family or a mix — there is an option within the range for all of these applications and more. With integrated SMD plug connectors (male/female) on both sides of the PCB, heat removal via the aluminum housing and compatibility with various accessories, the LINEARlight Colormix Overall Module integrates easily into a system or custom installation, and brings a welcome burst of color to many settings.
Areas of application
  • Restaurants
  • Architainment
  • Shops
  • Mood lighting and wallwashing (LR18CP)
  • Effect lighting (LR28CA)
  • Background lighting (LR18CE)
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.