LF05A-B3-P
- High-performance silicone for extremely long life and flexibility
- Stylish design
- Simple connection thanks to premounted connectors
- Decorative applications
- Wall integration
- Backlighting of complex structures
- Path lighting
- Signage
- CONNECTsystem LF-PROTECT
- LINEARlight Track LT
Technical Data
Electrical data
Input voltage range
23 25 V
Accidental reverse input voltage protection up to
25 V
Nominal voltage
24.0 V
Nominal wattage
72.00 W
Nominal current
3 A
Type of current
DC
Photometrical data
Luminous flux
840 lm
Luminous efficacy
12 lm/W
Light color (designation)
Blue
Light color LED
Blue
Nominal dominant wavelength
467 nm
Light technical data
Beam angle
120 °
LED module information
Number of LEDs per module
495
Dimensions & weight
Length
9900 mm
Length smallest unit
100.0 mm
Width
11.1 mm
Height
4.80 mm
Cable length
500.0
Product weight
800.00 g
Colors & materials
Cover material
Silicone
Body material
Silicone
Temperatures & operating conditions
Temperature range at storage
-40 +85 °C
Temperature range in operation at Tc point
-30 75 °C
Lifespan
Lifespan
50000 h
Additional product data
Product remark
Modules perfectly matched to OSRAM OPTOTRONIC LED drivers (see relevant table)/For current photometric data and important safety, installation and application information (see www.osram.com/led-systems)./All the technical parameters apply to the entire module. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values
Certificates & standards
Type of protection
IP67
Standards
CE
Logistical data
Commodity code
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
18-04-2022
Primary Article Identifier
4008321617804
Declaration No. in SCIP database
In work
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4008321617804 |
FS
| 1 | 353mm x 349mm x 32mm | 1279.00g | 3.94dm³ |
4008321617811 |
VS
| 8 | 366mm x 380mm x 286mm | 8971.00g | 39.78dm³ |
Downloads
Accessories optional
Information about Family
- Flexible and cuttable LED strip
- Type of protection: IP67
- Dimmable
- Fine White
- Highly UV-resistant
- Salt mist proof
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015. The contained light source is intended for use in applications requiring high-quality coloured light.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|
LF05A-B3-P
|
Blue | 12 lm/W | 72.00 W | 9900 mm |