LINEARlight ADVANCED Overall Module

Product family features
  • Design-oriented complete module with 14 LEDs and integrated optics
  • Luminous flux comparable with T5 fluorescent lamps (8 W, 13 W)
  • Luminous flux: up to 1,250 lm/m
  • Color rendering index Ra: typ. 85
  • Dimmable
  • Up to ten modules can be operated on one control gear
  • Compatible with LINEARlight POWER and ECO Overall Module
Product family benefits
  • Very flat construction height: 13 mm
  • Adequate heat removal thanks to aluminum housing
  • Modules can be easily joined together to make seamless strip lighting
  • Low maintenance costs thanks to a lifetime of up to 50,000 h (L70/B50)
Equipment / Accessories
  • CONNECTsystem LR
  • Mounting brackets LD-MB
  • LT-ENDCAP-G2

Products

Sort by:
Product
Color temperature
Color rendering index Ra
Total useful luminous flux
Rated wattage
Length
Data sheet
LR14A-W2F-840-L70
4000 K >80 350 lm 4.70 W 285.1 mm

Information about Family

Let this design-oriented complete module brings a touch of style to your professional lighting installations. It is simple to install, with a long lifetime. You can easily join modules to create strips of light at the length you require, and run up to ten modules from a single electronic control gear, while the low profile (13 mm) of the LINEARlight ADVANCED Overall Module makes it useful in many spaces. Its aluminum housing does not just look good, it also ensures adequate heat removal. Each module comes with 14 LEDs and integrated optics, giving dimmable, quality light of luminous flux up to 1,250 lm/m (that is comparable with T5 fluorescent lamps, 8 W, 13 W). The LINEARlight ADVANCED Overall Module is compatible with a range of accessories, including those from LINEARlight POWER and the ECO Overall Module, which gives you great freedom in terms of design and system creation. It is particularly good for use in shelf and cove lighting.
Areas of application
  • Cove lighting
  • Shelf and cupboard lighting
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads