LINEARlight POWER
Product family features
- Metal core board equipped with 21 LEDs
- Luminous flux comparable with T5 HE fluorescent lamps
- Luminous flux: up to 2,250 lm/m
- Integrated SMD plug connector (male/female) on both sides of the PCB
- Color rendering index Ra: typ. 85
- Dimmable
- Up to six modules can be operated on one control gear
- Compatible with LINEARlight ADVANCED and ECO
Product family benefits
- Consistent white light (Standard Deviation of Color Matching SDCM: ≤ 3)
- Modules can be easily joined together to make seamless strip lighting
- Low maintenance costs thanks to a lifetime of up to 50,000 h (L70/B50)
- Simple fixing thanks to mounting holes
Equipment / Accessories
- CONNECTsystem LR
- Expandable via optional accessories to create an individual complete module
Information about Family
Now you can quickly and easily create seamless strips of consistent white light with LINEARlight POWER. Each module houses 21 LEDs that generate dimmable light with luminous flux of up to 2,250 lm/m, which is comparable with T5 HE fluorescent lamps. Multiple LINEARlight POWER modules can be connected to make longer lengths, and up to six lengths can be controlled from a single control gear. This product is great for coving, shelf and cupboard lighting and general illumination, and as it’s compatible with a range of accessories including LINEARlight ADVANCED and ECO items, it works well as part of a system solution. There are integrated SMD plug connectors (male/female) on each side of the PCB and modules are easy to fix thanks to the mounting holes. With a long lifetime and low maintenance, LINEARlight POWER has many applications in domestic, commercial and enterprise lighting.
Areas of application
- Coving
- Shelf and cupboard lighting
- General illumination
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.