OTi DALI 50/220...240/1A4 LT2 FAN NFC

Product family benefits

Versatile DALI window driver due to flexible output characteristic
Very high efficiency
Protection of the system thanks to thermal management and Smart Control
High-quality dimming of 1…100 % by amplitude dimming
Easy and fast output current setting via NFC

Versatile scope of application due to OSRAM DALI Technology:

Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting

Areas of application

Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for use in luminaires with flexible current setting
Suitable for indoor SELV installations
Suitable for luminaires of protection classes I and II
Suitable for downlights, spotlights and LED panels
Installation via Cable Clamp Kit possible (depending on version of product)

Data sheet

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Input voltage DC

176…276 V

Total harmonic distortion

< 10 %

Power factor λ

> 0.95

Efficiency in full-load

91 %

Device power loss

7.5 W

Inrush current

30 A

Max. ECG no. on circuit breaker 10 A (B)

Max. ECG no. on circuit breaker 10 A (C)

Max. ECG no. on circuit breaker 16 A (B)

Max. ECG no. on circuit breaker 16 A (C)

Max. ECG no. on circuit breaker 25 A (B)

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

15…54 V

U-OUT (working voltage)

60 V

Nominal output current

600…1400 mA

Output current LEDset open

300 mA

Output current LEDset shorted

1050 mA

Default output current

1050 mA

Output current tolerance

±3 %

Output ripple current (100 Hz)

2 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

55 W

Maximum output power

55 W

Galvanic isolation DALI/mains

Basic

Networked standby power

0.15 W

Power loss in stand-by mode

0.15 W

Galvanic isolation primary/secondary

SELV

Galvanic isolation DALI/output

SELV

Current set

DALI / LEDset2 / NFC

Dimensions & weight

Mounting hole spacing, length

99.0 mm

Mounting hole spacing, width

64.0 mm

Product weight

180.00 g

Cable cross-section, input side

0.2…1.5 mm²

Cable cross-section, output side

0.2…1.5 mm²

Wire preparation length, input side

8.0…9.0 mm

Wire preparation length, output side

8.0…9.0 mm

Length

110.0 mm

Height

25.0 mm

Width

75.0 mm

Colors & materials

Casing material

Plastic

Temperatures & operating conditions

Ambient temperature range

-20…+50 °C

Maximum temperature at tc test point

80 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Lifespan

ECG lifetime

50000 / 100000 h

Additional product data

Successor EAN

4062172061889

Capabilities

Dimmable

Yes

Dimming interface

DALI-2 / Touch DIM / Touch DIM Sensor

Dimming range

1…100 %

Dimming method

Amplitude Modulation

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

Max. cable length to lamp/LED module

2.0 m

Suitable for fixtures with prot. class

I / II

Type of connection, input side

Push terminal

Type of connection, output side

Push terminal

Constant lumen function

Programmable

Programming interface

DALI, NFC, LEDset

Suitable for emergency lighting

Yes

Number of channels

Programming

Programming device

DALI / LEDset / NFC

Tuner4TRONIC

Yes

Tuner4TRONIC Field App

Yes

Programmable features

Constant Lumen

Yes

Lamp Operating Time

Yes

Driver Guard

Yes

DALI Settings

Yes

Emergency Mode

Yes

Configuration Lock

Yes

Soft Switch Off

Yes

Dim to Dark

Yes

TouchDIM + Sensor

Yes

Corridor Functionality

Yes

OEM Key

Certificates & standards

Approval marks – approval

ENEC 10 / VDE / EMC / EL / CE / DALI-2 / CCC

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386/Acc. to IEC 62386-101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC 62386-207:Ed1

Protection class

Type of protection

IP20

Logistical data

Commodity code

850440829000

Environmental information

Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

18-10-2022

Primary Article Identifier

4052899548251

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

1008c8e7-dd4d-416f-9ece-b748e84be23f

Packaging information

EAN	Unit	Piece	Dimension l x w x h	Weight	Volume
4052899548251	UNV Unpacked	1	110mm x 75mm x 25mm	180.00g	0.21dm³
4052899548268	VS Shipping box	20	389mm x 234mm x 72mm	4118.00g	6.55dm³

Downloads

Data sheets

Family data sheet

Data sheet

OPTOTRONIC LED Power Supply

User instruction

Size: 2.5 MB

OT EMC 40050085 200220

Certificates

Size: 259 kB

OT ENEC 40038447 260623

Certificates

Size: 257.2 kB

OT EMC 40044675 031022

Certificates

Size: 270.3 kB

OTI DALI NFC UK DoC 4291512 240221

Declarations of conformity

Size: 261 kB

EATON(CEAG) Conformity declaration AM12413_OTi_DALI_50_220-240_1A4_LT2_FAN_NFC

Declarations of conformity

Size: 1.1 MB

INOTEC Conformity declaration AM12413_OTi_DALI_50_220-240_1A4_LT2_FAN_NFC

Declarations of conformity

Size: 1.7 MB

OTI DALI NFC CE 3758701 161023

Declarations of conformity

Size: 131 kB

OTI DALI LT2 NFC IGS 130120

CAD data

Size: 600.9 kB

OTI DALI LT2 NFC CAD2PDF 130120

CAD Data 2-dim

Size: 96.2 kB

OTI DALI LT2 NFC CAD3PDF 130120

CAD data 3-dim

Size: 127 kB

OTI DALI LT2 NFC STEP 130120

CAD data PDF

Size: 528 kB

Accessories optional

OT CABLE CLAMP A-STYLE

4052899089570 Reduce

OT CABLE CLAMP A-STYLE TL

4052899325982 Reduce

Information about Family

Peace of mind – Freedom in design & usage.

This Compact LED Driver is fully digitally programmable by DALI, NFC and LT2 and includes 1…100% dimming. The very wide operating window and an optional cable clamp for independent installation and through-looping allow some flexibility in its usage.

Product family features

Supply voltage: 220…240 V
Line frequency: 0 Hz | 50 Hz | 60 Hz
Line voltage: 198…264 V
According to EN 61347-1, 61347-2-13, 62384
RI suppression: to EN 55015/CISPR 15
Line harmonics according to EN 61000-3-2
Immunity according to EN 61547
Lifetime: up to 100,000 h
Type of protection: IP20

Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product	Nominal output voltage	Nominal output current	Length	Width	Height
OTi DALI 10/220…240/700 NFC	2.5…45 V	150…700 mA	124.0 mm	31.0 mm	21.0 mm
OTi DALI 25/220…240/700 LT2 NFC	12…54 V	180…700 mA	103.0 mm	67.0 mm	29.5 mm
OTi DALI 50/220...240/1A4 LT2 FAN NFC	15…54 V	600…1400 mA	110.0 mm	75.0 mm	25.0 mm