QBM 220-240 LS/PD CI
- Ambient light dependent control and presence detection
- Shutter included to optimize sensor detection
- Simplified mounting for flush device boxes
- Large motion detection range
- Open offices
- Individual offices
- Conference rooms
- Classrooms
- Storage and break areas
- Stairways
- Sanitary areas
- Surface and recessed ceiling integration via QBM 220-240 LS/PD CM KIT
Technical Data
Electrical data
Nominal voltage
220 240 V
Mains frequency
50 60 Hz
Radio frequency
2.4 GHz
Maximum TX power
+4 dBm
Wireless protocol
Qualified Bluetooth mesh enabled by Silvair
Wireless range
10 m line of sight
Guaranteed supply current (DALI)
16 mA
Maximum supply current (DALI)
250 mA
System wattage
1.00 W
Standby power
< 0.5 W
Average input current
14 mA
Dimensions & weight
Diameter
105.0 mm
Mounting hole spacing, diagonal
68 80 mm
Height
45.0 mm
Product weight
182.58 g
Cable cross-section, input side
1.0 2.5 mm²
Wire preparation length, input side
6 8 mm
Wire preparation length, output side
6 8 mm
Cable cross-section, output side
1.0 2.5 mm²
Length
110.0 mm
Colors & materials
Product color
White
Temperatures & operating conditions
Ambient temperature range
0 +50 °C
Permitted rel. humidity during operation
0 90 %
Temperature range at storage
-20 70 °C
Permitted relative humidity at storage
0 90 %
Maximum temperature at tc test point
75 °C
Lifespan
Lifespan
50000 h
Capabilities
Control interface
qualified Bluetooth mesh
Number of control outputs
1
Number of connected drivers
8
Type of sensor
Daylight / PIR
Operating range, light sensor
10 1500 lx
Detection angle (Light sensor)
+/- 30°
Detection angle (PIR)
+/- 55°
Maximum installation height
4 m
Dimmable
Yes
Compatibility
Works with OSRAM HubSense
Status Indicator
Blue: Network status
Control output
DALI-2
Detection angle
90 °
Reset
Manual
Number of supported push buttons
4
Dimming interface
DALI-2
Type of installation
On-top ceiling mounting
Certificates & standards
Approval marks approval
CE / ioXT / PSA
Standards
Acc. to EN 55015 / Acc. to EN 61347-2-11 / Acc. to EN 61547 / Acc. to EN 62479 / Acc. to ETSI EN 300 328 / Acc. to ETSI EN 301 489-17 / Acc. to ETSI EN 301 489 - 1 / Acc. to EN 61347-2-1 / IEC 62386-101 / IEC 62386-103 / EN 62493
Type of protection
IP20
Logistical data
Commodity code
85371098990
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
30-06-2023
Primary Article Identifier
4062172161145
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
65741eb3-482b-4631-ab84-d43ec72c9b9c
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4062172161145 |
FS
| 1 | 123mm x 123mm x 95mm | 241.00g | 1.44dm³ |
4062172161152 |
VS
| 24 | 525mm x 390mm x 215mm | 6594.00g | 44.02dm³ |
Downloads
Information about Family
- Presence detection via passive IR element
- Detection height up to 4 meter
- Qualified Bluetooth mesh enabled by Silvair
- Works with OSRAM Hubsense
- Suitable for up to 8 DALI-2 LED drivers (Part - 207) in broadcast mode
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
QBM 220-240 LS/PD CI
|
220 240 V | 50 60 Hz | 2.4 GHz | +4 dBm | Qualified Bluetooth mesh enabled by Silvair |