BF400-G3-830-05
Product family benefits
- Consistent white light: 3 SDCM
- Color rendering index Ra: 80
- IP66 protection, IP54 when cut and reconnected to OSRAM CONNECT systems
- Available with protection class IP20 or IP66
- Dimmable (with suitable DALI dimming methods)
- Lifetime: up to 20,000 h (temperature at max. tc )
Areas of application
- Hospitality
- Cabinet lighting
- Signage
- Architecture lighting
- Wall integration
Technical Data
Electrical data
Nominal voltage
240 V
Type of current
DC
Rated wattage
2280 W
Input voltage range
23…25 V
Accidental reverse input voltage protection up to
24 V
Photometrical data
Light color LED
White
Color rendering index Ra
>80
Light color (designation)
White
Dimensions & weight
Length
5000 mm
Product weight
8500 g
Cable cross-section, input side
0.325 mm²
Height
110 mm
Width
800 mm
Temperatures & operating conditions
Temperature range in operation at Tc point
-20…75 °C
Temperature range at storage
-30…80 °C
Certificates & standards
Standards
CE
Energy efficiency class of the contained light source
F
Logistical data
Commodity code
853951000000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
19-01-2022
Primary Article Identifier
4052899594951
Declaration No. in SCIP database
In work
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4052899594951 |
BT
| 1 | 210mm x 210mm x 10mm | 112.00g | 0.44dm³ |
| 4052899594968 |
VS
| 20 | 245mm x 225mm x 230mm | 2615.00g | 12.68dm³ |
Downloads
Data sheets
Information about Family
Product family features
- Energy saving low-power flexible LED strip
- Easy installation with track system
- Multi-cuttable LED strip with CONNECT system
- Available in warm white and neutral white
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
Data sheet | ||
|---|---|---|---|---|
|
|
BF400-G3-830-05
|
>80 |