OTe 120/110 277/12 E
Product family benefits
- Versatile scope of application due to output power range of up to 300 W
- Very high efficiency
- IP rating: up to IP67
- High surge protection: up to 6 kV (L-N) / 6 kV (L/N-PE)
Areas of application
- Suitable for indoor and outdoor installations
- Ideal for mounting in very tight spaces
Technical Data
Electrical data
Nominal output power
120 W
Mains frequency
50 60 Hz
Nominal voltage
110 277 V
Nominal current
070 A
Device power loss
18 W
Power factor λ
095/090
Inrush current
109 A
Galvanic isolation primary/secondary
3.75 kV
Nominal output voltage
12.5 V
Maximum output power
120 W
Input voltage AC
100 305 V
Efficiency in full-load
89 %
Dimensions & weight
Length
2580 mm
Width
512 mm
Height
445 mm
Mounting hole spacing, length
246.0 mm
Product weight
115000 g
Temperatures & operating conditions
Ambient temperature range
-25 +55 °C
Permitted rel. humidity during operation
5 85 %
Capabilities
Suitable for fixtures with prot. class
I
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Number of channels
1
Dimmable
No
Certificates & standards
Type of protection
IP64
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Approval marks approval
CE / CB / CCC / BIS
Logistical data
Commodity code
850440829000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
14-04-2022
Primary Article Identifier
4008321821263
Declaration No. in SCIP database
In work
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4008321821263 |
FS
| 1 | |||
4008321821270 |
VS
| 10 | 408mm x 302mm x 141mm | 12459.00g | 17.37dm³ |
Downloads
Information about Family
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
OT 60/220
240/12 P
|
60 W | No | 1800 mm | 500 mm | 340 mm | |||
OT FIT 60/220-240/12 P
|
60 W | No | 1570 mm | 530 mm | 315 mm | |||
OTe 120/110
277/12 E
|
120 W | No | 2580 mm | 512 mm | 445 mm | |||
OT FIT 150/220-240/12 P
|
150 W | No | 2020 mm | 530 mm | 315 mm | |||
OT FIT 300/220-240/12 P
|
300 W | No | 2660 mm | 830 mm | 395 mm |