IT FIT 30/220…240/700 CS T-B
Product family benefits
- Compact size for miniaturized track light luminaire design
- High light quality due to low ripple current
- Three colors available: White, Grey, Black
- High flexibility due to eight different output currents
- High efficiency (up to 90%)
Areas of application
- Shops
- Retail outlets
- Public buildings
- Suitable for luminaires of protection class II
- Suitable for three circuits system
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
50/60 Hz
Input voltage AC
198…264 V
Total harmonic distortion
< 10 %
Power factor λ
096
Efficiency in full-load
90 %
Device power loss
3.3 W
Protective conductor current
<0.7 mA
Inrush current
24.8 A
Max. ECG no. on circuit breaker 10 A (C)
37
Max. ECG no. on circuit breaker 10 A (B)
22
Max. ECG no. on circuit breaker 16 A (C)
60
Max. ECG no. on circuit breaker 16 A (B)
36
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
27…42 V
U-OUT (working voltage)
60 V
Nominal output current
250 / 350 / 400 / 450 / 500 / 550 / 600 / 700 mA
Output current tolerance
±5 %
Output ripple current (100 Hz)
3 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
6.75…29.4 W
Maximum output power
29.4 W
Galvanic isolation primary/secondary
SELV
Default output current
700 mA
Dimensions & weight
Mounting hole spacing, length
-
Mounting hole spacing, width
-
Product weight
10800 g
Cable cross-section, input side
-
Cable cross-section, output side
0.5…1.5 mm²
Wire preparation length, input side
-
Wire preparation length, output side
7…8 mm
Width
330 mm
Height
460 mm
Length
1670 mm
Colors & materials
Casing material
Plastic
Product color
BLACK RAL 9011
Temperatures & operating conditions
Ambient temperature range
-20…+35 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-20…80 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
50000 h
Additional product data
Encapsulated
No
Predecessor EAN
4052899617247
Compatible track systems
Nuco / Ivela / EUTRAC / GLOBAL / STAFF / NORLUX / Unipro / Powergear / ERCO
Capabilities
Dimmable
No
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
II
Type of connection, output side
Push terminal
Number of channels
1
Programming
Programming device
DIPswitch
Certificates & standards
Approval marks – approval
CE / ENEC / RCM / CQC / UKCA
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61547
Type of protection
IP20
Protection class
II
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
01-12-2023
Primary Article Identifier
4062172379847
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
dfd12057-00f6-4c15-be48-969fb49a9a27
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4062172379847 |
UNV
| 1 | 108.00g | ||
| 4062172379854 |
VS
| 20 | 378mm x 187mm x 118mm | 2459.00g | 8.34dm³ |
Downloads
Data sheets
Information about Family
Product family features
- AC Supply Voltage 220-240 Vac
- Line frequency: 50 Hz | 60 Hz
- Line voltage: 198…264 V
- SELV LED driver in track adaptor
- Lifetime 50 000 h at tc max
- Dip-switches for easy output current selection
- Low THD <10% @ full load
- Low LF-ripple < 5%
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
|
IT FIT 30/220…240/700 CS T-B
|
27…42 V | 250 / 350 / 400 / 450 / 500 / 550 / 600 / 700 mA | 1670 mm | 330 mm | 460 mm |