OT 150/220-240/4A2 DIM P7
- Easily current adjustment by potentiometer
- High surge protection: up to 10 kV
- 0 10 V dimming (minimum10%)
- High efficiency (up to 93%)
- Adjustable and wide output current range
- Wide output voltage & current range for multiple applications
- Double isolation between primary/secondary sides (SELV)
- Over temperature protection
- IP rating: IP67 (Independent installation)
- Long lifetime
- Street and urban lighting
- Industry lighting
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Nominal voltage
220 240 V
Input voltage AC
198 264 V
Nominal current
085 A
Mains frequency
50 60 Hz
Power factor λ
> 095
Total harmonic distortion
< 5 %
Device power loss
10.5 W
Inrush current
60 A
Max. ECG no. on circuit breaker 10 A (B)
3
Max. ECG no. on circuit breaker 16 A (B)
6
Max. ECG no. on circuit breaker 25 A (B)
9
Surge capability (L/N-Ground)
10 kV
Surge capability (L-N)
6 kV
Nominal output power
105 150 W
Maximum output power
150 W
Efficiency in full-load
93.5 %
Nominal output current
3.1A...4.2 A
Output current tolerance
±5 %
Output ripple current (100 Hz)
< 5 %
Minimum output current
3.1 A
Galvanic isolation
double/reinforced
Nominal output voltage
36...48 V
Dimensions & weight
Length
1880 mm
Width
600 mm
Height
330 mm
Mounting hole spacing, length
174.0 mm
Mounting hole spacing, width
45.8 mm
Product weight
72000 g
Cable cross-section, input side
1.0 mm²
Cable cross-section, output side
1.0 mm²
Wire preparation length, input side
10 mm
Temperatures & operating conditions
Ambient temperature range
-40 +55 °C
Temperature range at storage
-40 +85 °C
Maximum temperature at tc test point
90 °C
Max.housing temperature in case of fault
110 °C
Permitted rel. humidity during operation
5 85 %
Lifespan
ECG lifetime
50000 h
Capabilities
Dimmable
Yes
Dimming interface
0-10V
Dimming range
10 100 %
Suitable for fixtures with prot. class
I
Short-circuit protection
Yes
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Number of channels
1
Overload protection
Yes
Certificates & standards
Type of protection
IP67
Standards
Acc. to EN 61347-2-13/Acc. to EN 61347-1/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1 (ED.8)/Acc. to EN 62384
Approval marks approval
CCC / CE / ENEC 25 / IP67 / RCM / SELV
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
02-06-2023
Primary Article Identifier
4062172087254
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
4c625de7-ea51-447a-9372-cee5bc9dc50c
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4062172087254 |
UNV
| 1 | 720.00g |
Downloads
Information about Family
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|
OT 100/220-240/2A8 DIM P7
|
2A 2.8 A | 1670 mm | 600 mm | 330 mm | |||
OT 150/220-240/4A2 DIM P7
|
3.1A...4.2 A | 1880 mm | 600 mm | 330 mm | |||
OT 200/220-240/5A6 DIM P7
|
4.2 A...5.6 A | 1670 mm | 600 mm | 330 mm |