OT 200/220-240/5A6 P7
Product family benefits
- Easily current adjustment by potentiometer
- High surge protection: up to 10 kV
- High efficiency (up to 93%)
- Adjustable and wide output current range
- Wide output voltage & current range for multiple applications
- Double isolation between primary/secondary sides (SELV)
- Over temperature protection
- IP rating: IP67 (Independent installation)
- Long lifetime
Areas of application
- Street and urban lighting
- Industry lighting
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Nominal voltage
220…240 V
Input voltage AC
198…264 V
Nominal current
120 A
Mains frequency
50…60 Hz
Power factor λ
> 095
Total harmonic distortion
< 5 %
Device power loss
14 W
Inrush current
65 A
Max. ECG no. on circuit breaker 10 A (B)
2
Max. ECG no. on circuit breaker 10 A (C)
-
Max. ECG no. on circuit breaker 16 A (C)
-
Max. ECG no. on circuit breaker 16 A (B)
4
Max. ECG no. on circuit breaker 25 A (B)
7
Surge capability (L/N-Ground)
10 kV
Surge capability (L-N)
6 kV
Nominal output power
140…200 W
Maximum output power
200 W
Efficiency in full-load
93.5 %
Nominal output voltage
36...48 V
U-OUT (working voltage)
60 V
Nominal output current
4.2 A...5.6 A
Output current tolerance
±5 %
Minimum output current
4.2 A
Galvanic isolation
double/reinforced
Dimensions & weight
Length
2130 mm
Width
600 mm
Height
35 mm
Mounting hole spacing, length
199.0 mm
Product weight
75000 g
Cable cross-section, input side
1.0 mm²
Cable cross-section, output side
1.0 mm²
Wire preparation length, input side
10 mm
Temperatures & operating conditions
Ambient temperature range
-40…+55 °C
Temperature range at storage
-40…+85 °C
Maximum temperature at tc test point
90 °C
Max.housing temperature in case of fault
120 °C
Lifespan
ECG lifetime
50000 h
Capabilities
Dimmable
No
Suitable for fixtures with prot. class
I
Intended for no-load operation
No
Number of channels
1
Control interface
0-10V
Certificates & standards
Type of protection
IP67
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 62384/Acc. to EN 60598-1 (ED.8)
Approval marks – approval
CE / CCC / RCM / ENEC 25 / IP67 / SELV
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
02-06-2023
Primary Article Identifier
4062172087216
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
1c270ef4-7548-4b9a-aacc-61fe993568f4
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4062172087216 |
UNV
| 1 | 750.00g | ||
| 4062172087223 |
VS
| 15 | 399mm x 289mm x 183mm | 11904.00g | 21.10dm³ |
Downloads
Information about Family
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|
|
OT 150/220-240/4A2 P7
|
3.1A...4.2 A | 1880 mm | 600 mm | 35 mm | ||
|
|
OT 200/220-240/5A6 P7
|
4.2 A...5.6 A | 2130 mm | 600 mm | 35 mm |