OT FIT 150/220-240/12 P IN

Product family benefits
  • Small housing design
  • Versatile scope of application due to output power range of up to 300 W
  • Robust and durable design for outdoor application
Areas of application
  • Signage lighting, channel letter lighting, luminous ceilings, etc…
  • Suitable for indoor and outdoor SELV equivalent installations
541871_NON EU BK

Technical Data

Electrical data

Nominal output power

150 W

Mains frequency

50…60 Hz

Nominal voltage

220…240 V

Nominal current

085 A

Device power loss

14.8 W

Power factor λ

095

Typical, Full load, 230 VAC, 50 Hz / 60 Hz

Inrush current

55 A

At Full Load, 240VAC, Cold Start
Duration=500uS 50%Ipk—50%Ipk

Efficiency in full-load

91 %

at 230 V, 50 Hz

Output ripple Voltage (100 Hz)

< 3 %

ripple @ 100 Hz / full load

Maximum output power

150 W

at steady state

Nominal output voltage

12.5 V

Input voltage AC

180…280 V

Dimensions & weight

Length

2020 mm

Width

530 mm

Height

315 mm

Mounting hole spacing, length

188.0 mm

Mounting hole spacing, width

27.0 mm

Product weight

92000 g

Temperatures & operating conditions

Ambient temperature range

-40…+50 °C

At fullload, Tc not exceeded

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Capabilities

Suitable for fixtures with prot. class

I / II

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Dimmable

No

Number of channels

1

Certificates & standards

Type of protection

IP66/IP67

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384

Approval marks – approval

CE / ENEC / RCM / BIS

Logistical data

Commodity code

850440829000

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

14-04-2022

Primary Article Identifier

4062172133524

Declaration No. in SCIP database

In work

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172133524 UNV

Unpacked

1 202mm x 53mm x 32mm 920.00g 0.34dm³
4062172133531 VS

Shipping box

15 349mm x 284mm x 153mm 14185.00g 15.16dm³

Downloads

Information about Family

Product family features
  • Suitable for Class I/II luminaires
  • SELV, Vout: 12.5 V
  • Wide ta range -40 °C…+70 °C
  • Driver with output power range of up to 300 W
  • High efficiency up to 91 %
  • Smart Power Supply
  • THD <5 % at full load
  • High IP protection (IP66 / IP67)
  • High surge protection: up to 6 kV (L-N) / 6 kV (L/N-PE)
  • High surge protection: up to 6 kV (L-N) / 10 kV (L/N-PE) (IN version)
  • Short-circuit, overload and overtemperature protection
  • Lifetime: up to 50,000 h (temperature at Tc = 80 °C, max. 10 % failure rate)
  • Mains voltage: 220 – 240 VAC
  • IN version only for India
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output power
Dimmable
Length
Width
Height
Data sheet
OT FIT 150/220-240/12 P IN
150 W No 2020 mm 530 mm 315 mm
OT FIT 300/220-240/12 P IN
300 W No 2660 mm 830 mm 395 mm